FD90 and FD120 fire doors in March: how we work
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in March, Cambridgeshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
March is about 14 miles from Peterborough. Wherever your building is in PE15, we arrange survey and fitting dates around access and occupancy.
Which rules apply in March?
Because March is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD90 and FD120 fire doors prices in March
Our guide price for FD90 and FD120 fire doors in March is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are used in March
Wherever they are in March, FD90 and FD120 fire doors are most often specified for high fire-load stores and generator rooms.
Cambridgeshire combines Cambridge's labs, colleges and student housing with Peterborough's growing residential and logistics sectors.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in March
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in March: questions
Can you work around tenants or staff in March?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD90 and FD120 fire doors in March need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How quickly can you survey in March?
We arrange surveys around your access needs and, where possible, combine March visits with other work in Cambridgeshire. Tell us your preferred dates when you enquire.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near March
- Wisbech (9 miles)
- Ely (13 miles)
- Peterborough (14 miles)
- King's Lynn (19 miles)
- Spalding (19 miles)
- Huntingdon (19 miles)
Other products in March
- Glazed Fire Doors in March
- Stairwell & Escape Route Doors in March
- Timber Fire Doorsets in March
- Double & Leaf-and-a-Half Fire Doors in March
- Communal & Corridor Fire Doors in March
- Fire Door Replacement in March
- Steel Fire Doors in March
- FD30 Fire Doorsets in March
- FD90 & FD120 Doorsets across Cambridgeshire
- All fire doors in March