FD90 & FD120 Doorsets for Amersham buildings
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Amersham, Buckinghamshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Amersham surveys with other visits in Buckinghamshire, such as Chesham and Chalfont St Peter, which helps keep survey dates flexible.
Which rules apply in Amersham?
New and replacement fire doors in Amersham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD90 and FD120 fire doors in Buckinghamshire
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Amersham are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Amersham
In Amersham, FD90 and FD120 fire doors are typically needed in high fire-load stores and generator rooms.
Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Amersham: questions
Can you work around tenants or staff in Amersham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Amersham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Amersham.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Chesham (2 miles)
- Chalfont St Peter (5 miles)
- Gerrards Cross (6 miles)
- High Wycombe (6 miles)
- Rickmansworth (6 miles)
- Berkhamsted (7 miles)
Also available in Amersham
- Steel Fire Doors in Amersham
- Fire Door Ironmongery & Closers in Amersham
- Commercial & Office Fire Doors in Amersham
- Fire Door Replacement in Amersham
- Timber Fire Doorsets in Amersham
- FD60 Fire Doorsets in Amersham
- Fire Door Supply & Fit in Amersham
- Stairwell & Escape Route Doors in Amersham
- FD90 & FD120 Doorsets across Buckinghamshire
- All fire doors in Amersham