Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Thatcham

We supply and fit FD90 and FD120 fire doors in Thatcham (RG19) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,900 per single doorset in Thatcham, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Certified FD90 and FD120 fire doors for Thatcham

Getting FD90 and FD120 fire doors right in Thatcham means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Thatcham is about 13 miles from Reading. Wherever your building is in RG19, we arrange survey and fitting dates around access and occupancy.

Regulations for FD90 and FD120 fire doors in Berkshire

In Thatcham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

FD90 and FD120 fire doors prices in Thatcham

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Thatcham quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD90 and FD120 fire doors

Wherever they are in Thatcham, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and generator rooms.

Berkshire's office parks around Reading, Slough and Bracknell sit alongside a growing number of town-centre apartment blocks.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

Doorset specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

How it works in Thatcham

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

FD90 and FD120 fire doors in Thatcham: questions

Do you work for landlords and managing agents in Thatcham?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Thatcham.

Will I get certificates for the doors fitted in Thatcham?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

How long do they take to make?

Usually several weeks as they are made to order. We confirm lead time on your quote.

Nearby towns we cover

Also available in Thatcham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.