Our Crowthorne supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Crowthorne, Berkshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Crowthorne is about 10 miles from Reading. Wherever your building is in RG45, we arrange survey and fitting dates around access and occupancy.
What the law says in Crowthorne
Fire doors in Crowthorne sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Berkshire
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Crowthorne quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Crowthorne, FD90 and FD120 fire doors are most often specified for high fire-load stores and transformer and switch rooms.
Berkshire's office parks around Reading, Slough and Bracknell sit alongside a growing number of town-centre apartment blocks.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Berkshire
Will I get certificates for the doors fitted in Crowthorne?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD90 and FD120 fire doors in Crowthorne need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Crowthorne quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Sandhurst (2 miles)
- Yateley (2 miles)
- Camberley (3 miles)
- Wokingham (3 miles)
- Bracknell (4 miles)
- Farnborough (6 miles)
Other fire doors in Crowthorne
- Fire-Rated Screens & Fanlights in Crowthorne
- Composite Fire Doors in Crowthorne
- FD30S Smoke Control Doorsets in Crowthorne
- Fire Door Ironmongery & Closers in Crowthorne
- Double & Leaf-and-a-Half Fire Doors in Crowthorne
- FD30 Fire Doorsets in Crowthorne
- HMO Fire Doors in Crowthorne
- Commercial & Office Fire Doors in Crowthorne
- FD90 & FD120 Doorsets across Berkshire
- All fire doors in Crowthorne