Certified FD90 and FD120 fire doors for Irvine
We cover Irvine and nearby Kilmarnock for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover KA12 and the surrounding area, including Kilmarnock. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Ayrshire
Scotland has its own system: new and replacement fire doors in Irvine are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
What do FD90 and FD120 fire doors cost in Irvine?
Guide prices for FD90 and FD120 fire doors in Irvine run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Irvine include high fire-load stores and separating walls with long ratings.
Ayrshire's towns combine traditional housing and council estates with schools, hotels and industrial estates.
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Irvine
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Ayrshire
How quickly can you survey in Irvine?
We arrange surveys around your access needs and, where possible, combine Irvine visits with other work in Ayrshire. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Irvine?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Irvine?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Irvine
- Kilmarnock (6 miles)
- Ayr (11 miles)
- Newton Mearns (16 miles)
- Paisley (17 miles)
- Renfrew (20 miles)
- East Kilbride (21 miles)
Also available in Irvine
- Security Fire Doors in Irvine
- Fire Door Ironmongery & Closers in Irvine
- Acoustic Fire Doors in Irvine
- Fire-Rated Screens & Fanlights in Irvine
- Timber Fire Doorsets in Irvine
- FD30 Fire Doorsets in Irvine
- Fire Door Supply & Fit in Irvine
- Fire Door Replacement in Irvine
- FD90 & FD120 Doorsets across Ayrshire
- All fire doors in Irvine