Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Evesham

We supply and fit FD60 fire doors in Evesham (WR11) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Evesham, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for Evesham

We cover Evesham and nearby Tewkesbury for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Evesham is about 13 miles from Worcester; we cover both, along with Tewkesbury, Stratford-upon-Avon and Worcester.

Fire door rules in Evesham

New and replacement fire doors in Evesham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Guide prices in Evesham

Our guide price for FD60 fire doors in Evesham is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are used in Evesham

Typical uses for FD60 fire doors in Evesham include compartment walls and stair cores in taller blocks.

Worcestershire mixes Worcester's student and city-centre housing with Redditch's industry and Malvern's schools and care homes.

  • Compartment walls
  • Stair cores in taller blocks
  • Higher-risk stores
  • Plant and boiler rooms

Doorset specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Tell us about the doors — photos help
  2. Free measure survey at your Evesham property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Your questions answered

Do you cover Evesham?

Yes. We survey, supply and fit FD60 fire doors throughout Evesham and the rest of Worcestershire, including WR11 and nearby Tewkesbury.

What does a Evesham quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Can you work around tenants or staff in Evesham?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Nearby towns we cover

Other products in Evesham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.