Getting FD60 fire doors fitted in Newmarket
For landlords, managing agents, businesses and homeowners in Newmarket, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Newmarket is about 34 miles from Ipswich. Wherever your building is in CB8, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Newmarket?
Fire doors in Newmarket sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Suffolk
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Newmarket quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are used in Newmarket
In Newmarket, FD60 fire doors are typically needed in stair cores in taller blocks and compartment walls.
Suffolk's demand comes from Ipswich's waterfront flats and offices, Felixstowe's port logistics and market towns across the county.
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey in Newmarket free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Newmarket?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Newmarket?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Suffolk.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Haverhill (11 miles)
- Ely (12 miles)
- Cambridge (12 miles)
- Bury St Edmunds (13 miles)
- Thetford (19 miles)
- Sudbury (20 miles)
Other products in Newmarket
- FD30S Smoke Control Doorsets in Newmarket
- Riser & Service Cupboard Doors in Newmarket
- Commercial & Office Fire Doors in Newmarket
- Composite Fire Doors in Newmarket
- Flat Entrance Fire Doors in Newmarket
- Double & Leaf-and-a-Half Fire Doors in Newmarket
- Fire Door Ironmongery & Closers in Newmarket
- Security Fire Doors in Newmarket
- FD60 Fire Doorsets across Suffolk
- All fire doors in Newmarket