Certified FD60 fire doors for Barry
Getting FD60 fire doors right in Barry means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Barry is about 7 miles from Cardiff. Wherever your building is in CF62, we arrange survey and fitting dates around access and occupancy.
Regulations for FD60 fire doors in South Glamorgan
In Barry the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
FD60 fire doors prices in Barry
Guide prices for FD60 fire doors in Barry run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Barry
Compartment walls and higher-risk stores are among the most common settings for FD60 fire doors, in Barry as elsewhere.
Cardiff's city-centre apartments, student housing and offices lead demand, with Barry and Penarth adding converted houses and care homes.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD60 fire doors in Barry
Will I get certificates for the doors fitted in Barry?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Barry free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Barry?
Yes. We survey, supply and fit FD60 fire doors throughout Barry and the rest of South Glamorgan, including CF62 and nearby Penarth.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Penarth (6 miles)
- Cardiff (7 miles)
- Caerphilly (12 miles)
- Weston-super-Mare (14 miles)
- Pontypridd (14 miles)
- Bridgend (15 miles)
Other products in Barry
- Glazed Fire Doors in Barry
- Timber Fire Doorsets in Barry
- Fire Door Ironmongery & Closers in Barry
- Fire-Rated Screens & Fanlights in Barry
- Fire Exit Doors in Barry
- Composite Fire Doors in Barry
- School & Healthcare Fire Doors in Barry
- Steel Fire Doors in Barry
- FD60 Fire Doorsets across South Glamorgan
- All fire doors in Barry