Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Greenock

We supply and fit FD60 fire doors in Greenock (PA15) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,050 per single doorset in Greenock, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for Greenock

We fit FD60 doorsets for compartment walls, cores and plant rooms in Greenock and the rest of Renfrewshire & Inverclyde. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.

Greenock is about 15 miles from Paisley; we cover both, along with Helensburgh, Vale of Leven and Clydebank.

Which rules apply in Greenock?

In Greenock the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

FD60 fire doors prices in Greenock

Guide prices for FD60 fire doors in Greenock run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD60 fire doors are used in Greenock

Typical uses for FD60 fire doors in Greenock include plant and boiler rooms and compartment walls.

Paisley, Renfrew and Greenock combine traditional tenements and council blocks with Glasgow Airport-related industry.

  • Plant and boiler rooms
  • Compartment walls
  • Higher-risk stores
  • Stair cores in taller blocks

What you get with each doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Greenock.

Will I get certificates for the doors fitted in Greenock?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Greenock?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Also covering towns near Greenock

More doorsets for Greenock

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.