FD60 Fire Doorsets for Portsmouth buildings
Need FD60 fire doors in Portsmouth? We supply and fit complete certified doorsets across Hampshire, starting with a free measure survey in and around PO1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Our Hampshire coverage includes Portsmouth and its neighbours Gosport, Fareham and Ryde; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD60 fire doors in Hampshire
Because Portsmouth is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Hampshire
Our guide price for FD60 fire doors in Portsmouth is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Portsmouth
In Portsmouth, FD60 fire doors are typically needed in compartment walls and plant and boiler rooms.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Portsmouth
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Hampshire
Is the survey in Portsmouth free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Portsmouth.
Can you work around tenants or staff in Portsmouth?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Portsmouth
- Gosport (2 miles)
- Fareham (6 miles)
- Ryde (6 miles)
- Havant (6 miles)
- Waterlooville (6 miles)
- Cowes (9 miles)
Other products in Portsmouth
- Commercial & Office Fire Doors in Portsmouth
- School & Healthcare Fire Doors in Portsmouth
- Security Fire Doors in Portsmouth
- Fire Doors for Homes in Portsmouth
- Fire Door Replacement in Portsmouth
- FD90 & FD120 Doorsets in Portsmouth
- FD30 Fire Doorsets in Portsmouth
- Fire Door Ironmongery & Closers in Portsmouth
- FD60 Fire Doorsets across Hampshire
- All fire doors in Portsmouth