Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Wigan

We supply and fit FD60 fire doors in Wigan (WN1) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Wigan, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Getting FD60 fire doors fitted in Wigan

Getting FD60 fire doors right in Wigan means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

We cover WN1 and the surrounding area, including Hindley. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Fire door rules in Wigan

In Wigan, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

FD60 fire doors prices in Wigan

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Wigan are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Where FD60 fire doors are needed

Typical uses for FD60 fire doors in Wigan include compartment walls and plant and boiler rooms.

Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.

  • Compartment walls
  • Plant and boiler rooms
  • Higher-risk stores
  • Stair cores in taller blocks

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Tell us about the doors — photos help
  2. Free measure survey at your Wigan property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Questions about FD60 fire doors in Wigan

Do you work for landlords and managing agents in Wigan?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Can you work around tenants or staff in Wigan?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Will I get certificates for the doors fitted in Wigan?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Nearby towns we cover

Also available in Wigan

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.