FD60 fire doors in Leigh: how we work
If your fire risk assessment in Leigh has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in WN7 are free and quotes are fixed and itemised.
Leigh is about 12 miles from Manchester. Wherever your building is in WN7, we arrange survey and fitting dates around access and occupancy.
What the law says in Leigh
Fire doors in Leigh sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Leigh
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Leigh quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Leigh
Stair cores in taller blocks and higher-risk stores are among the most common settings for FD60 fire doors, in Leigh as elsewhere.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Leigh
What does a Leigh quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Leigh?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you work for landlords and managing agents in Leigh?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Atherton (2 miles)
- Tyldesley (2 miles)
- Golborne (4 miles)
- Westhoughton (4 miles)
- Hindley (4 miles)
- Newton-le-Willows (4 miles)
Other products in Leigh
- Communal & Corridor Fire Doors in Leigh
- Fire Door Replacement in Leigh
- FD30 Fire Doorsets in Leigh
- Glazed Fire Doors in Leigh
- Riser & Service Cupboard Doors in Leigh
- FD30S Smoke Control Doorsets in Leigh
- Double & Leaf-and-a-Half Fire Doors in Leigh
- Security Fire Doors in Leigh
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Leigh