Our Rochdale supply and fit service
Looking for FD60 fire doors in Rochdale? Our supply and fit service covers OL16 and the surrounding area, including Heywood and Royton. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Rochdale is about 10 miles from Manchester. Wherever your building is in OL16, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Rochdale?
Because Rochdale is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Greater Manchester
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Rochdale are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Rochdale
Wherever they are in Rochdale, FD60 fire doors are most often specified for higher-risk stores and compartment walls.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Higher-risk stores
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Rochdale
Can you fit just one door in Rochdale?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater Manchester.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Rochdale.
Can you work around tenants or staff in Rochdale?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Also covering towns near Rochdale
- Heywood (3 miles)
- Royton (4 miles)
- Middleton (5 miles)
- Chadderton (5 miles)
- Oldham (6 miles)
- Bury (6 miles)
Also available in Rochdale
- Commercial & Office Fire Doors in Rochdale
- FD30S Smoke Control Doorsets in Rochdale
- School & Healthcare Fire Doors in Rochdale
- Fire Exit Doors in Rochdale
- Composite Fire Doors in Rochdale
- FD90 & FD120 Doorsets in Rochdale
- Fire Door Replacement in Rochdale
- Security Fire Doors in Rochdale
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Rochdale