Getting FD60 fire doors fitted in Atherton
Need FD60 fire doors in Atherton? We supply and fit complete certified doorsets across Greater Manchester, starting with a free measure survey in and around M46. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Atherton is about 11 miles from Manchester; we cover both, along with Tyldesley, Westhoughton and Leigh.
Fire door rules in Atherton
Fire doors in Atherton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD60 fire doors prices in Atherton
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Atherton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are needed
In Atherton, FD60 fire doors are typically needed in compartment walls and higher-risk stores.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Atherton: questions
Is the survey in Atherton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Atherton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Atherton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Atherton
- Tyldesley (1 mile)
- Westhoughton (2 miles)
- Leigh (2 miles)
- Hindley (4 miles)
- Walkden (4 miles)
- Farnworth (4 miles)
More doorsets for Atherton
- Commercial & Office Fire Doors in Atherton
- Communal & Corridor Fire Doors in Atherton
- Timber Fire Doorsets in Atherton
- Fire-Rated Screens & Fanlights in Atherton
- Riser & Service Cupboard Doors in Atherton
- Fire Doors for Homes in Atherton
- Composite Fire Doors in Atherton
- Flat Entrance Fire Doors in Atherton
- FD60 Fire Doorsets across Greater Manchester
- All fire doors in Atherton