FD60 fire doors in Sandhurst: how we work
We fit FD60 doorsets for compartment walls, cores and plant rooms in Sandhurst and the rest of Berkshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Sandhurst surveys with other visits in Berkshire, such as Crowthorne and Yateley, which helps keep survey dates flexible.
What the law says in Sandhurst
New and replacement fire doors in Sandhurst are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Sandhurst
Guide prices for FD60 fire doors in Sandhurst run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are used in Sandhurst
Wherever they are in Sandhurst, FD60 fire doors are most often specified for plant and boiler rooms and compartment walls.
Berkshire's office parks around Reading, Slough and Bracknell sit alongside a growing number of town-centre apartment blocks.
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Berkshire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Sandhurst.
Do you cover Sandhurst?
Yes. We survey, supply and fit FD60 fire doors throughout Sandhurst and the rest of Berkshire, including GU47 and nearby Crowthorne.
Can you work around tenants or staff in Sandhurst?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Sandhurst
- Crowthorne (2 miles)
- Yateley (2 miles)
- Camberley (2 miles)
- Farnborough (4 miles)
- Fleet (5 miles)
- Bracknell (5 miles)
Other products in Sandhurst
- Fire Door Replacement in Sandhurst
- Commercial & Office Fire Doors in Sandhurst
- Fire Doors for Homes in Sandhurst
- Flat Entrance Fire Doors in Sandhurst
- Stairwell & Escape Route Doors in Sandhurst
- Security Fire Doors in Sandhurst
- Riser & Service Cupboard Doors in Sandhurst
- FD90 & FD120 Doorsets in Sandhurst
- FD60 Fire Doorsets across Berkshire
- All fire doors in Sandhurst