Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Bracknell

We supply and fit FD60 fire doors in Bracknell (RG12) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Bracknell, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for Bracknell

For landlords, managing agents, businesses and homeowners in Bracknell, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

Our Berkshire coverage includes Bracknell and its neighbours Crowthorne, Wokingham and Sandhurst; tell us your postcode and preferred dates and we'll confirm a survey slot.

Which rules apply in Bracknell?

Because Bracknell is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

What do FD60 fire doors cost in Bracknell?

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Bracknell quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD60 fire doors

Typical uses for FD60 fire doors in Bracknell include compartment walls and plant and boiler rooms.

Berkshire's office parks around Reading, Slough and Bracknell sit alongside a growing number of town-centre apartment blocks.

  • Compartment walls
  • Plant and boiler rooms
  • Stair cores in taller blocks
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

How it works in Bracknell

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Questions about FD60 fire doors in Bracknell

Is the survey in Bracknell free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bracknell.

Can you work around tenants or staff in Bracknell?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

How thick is an FD60 door?

Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.

FD60 Fire Doorsets near Bracknell

More doorsets for Bracknell

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.