Certified FD30S fire doors for Ryde
Need FD30S fire doors in Ryde? We supply and fit complete certified doorsets across Isle of Wight, starting with a free measure survey in and around PO33. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Ryde is about 6 miles from Newport. Wherever your building is in PO33, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Ryde?
Fire doors in Ryde sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Ryde?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Ryde are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Ryde
In Ryde, FD30S fire doors are typically needed in lobby doors in blocks of flats and cross-corridor doors.
The Isle of Wight's hotels, holiday accommodation and care homes make up much of its fire door work, alongside town-centre flats.
- Lobby doors in blocks of flats
- Cross-corridor doors
- Integral garage doors
- Protected stairways
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Ryde property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD30S fire doors in Ryde
What does a Ryde quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Ryde free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Ryde?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Neighbouring areas
- Gosport (5 miles)
- Sandown (6 miles)
- Portsmouth (6 miles)
- Newport, Isle of Wight (6 miles)
- Cowes (6 miles)
- Fareham (9 miles)
Other products in Ryde
- Composite Fire Doors in Ryde
- Riser & Service Cupboard Doors in Ryde
- Fire Door Ironmongery & Closers in Ryde
- FD90 & FD120 Doorsets in Ryde
- Communal & Corridor Fire Doors in Ryde
- Double & Leaf-and-a-Half Fire Doors in Ryde
- Fire-Rated Screens & Fanlights in Ryde
- Steel Fire Doors in Ryde
- FD30S Smoke Control Doorsets across Isle of Wight
- All fire doors in Ryde