Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Stevenage

We supply and fit FD30S fire doors in Stevenage (SG1) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Stevenage, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Stevenage

We fit FD30S smoke control doorsets for flats, stairs and corridors in Stevenage and the rest of Hertfordshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.

Stevenage is about 19 miles from Watford. Wherever your building is in SG1, we arrange survey and fitting dates around access and occupancy.

Regulations for FD30S fire doors in Hertfordshire

In Stevenage, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

FD30S fire doors prices in Stevenage

Our guide price for FD30S fire doors in Stevenage is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where FD30S fire doors are needed

In Stevenage, FD30S fire doors are typically needed in protected stairways and cross-corridor doors.

Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.

  • Protected stairways
  • Cross-corridor doors
  • Lobby doors in blocks of flats
  • Integral garage doors

What's in the doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

How it works in Stevenage

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

FD30S fire doors in Stevenage: questions

Will I get certificates for the doors fitted in Stevenage?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Stevenage?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you work for landlords and managing agents in Stevenage?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Neighbouring areas

Also available in Stevenage

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.