Our Farnworth supply and fit service
Fire Rated Doors supplies and fits FD30S fire doors in Farnworth, Greater Manchester. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Farnworth surveys with other visits in Greater Manchester, such as Walkden and Bolton, which helps keep survey dates flexible.
Regulations for FD30S fire doors in Greater Manchester
Fire doors in Farnworth sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD30S fire doors prices in Farnworth
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Farnworth are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Farnworth
Lobby doors in blocks of flats and cross-corridor doors are among the most common settings for FD30S fire doors, in Farnworth as elsewhere.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Lobby doors in blocks of flats
- Cross-corridor doors
- Protected stairways
- Integral garage doors
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you cover Farnworth?
Yes. We survey, supply and fit FD30S fire doors throughout Farnworth and the rest of Greater Manchester, including BL4 and nearby Walkden.
Which rules do FD30S fire doors in Farnworth need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Farnworth?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Nearby towns we cover
- Walkden (2 miles)
- Bolton (2 miles)
- Radcliffe (3 miles)
- Tyldesley (4 miles)
- Swinton (4 miles)
- Whitefield (4 miles)
Other products in Farnworth
- Timber Fire Doorsets in Farnworth
- Commercial & Office Fire Doors in Farnworth
- Security Fire Doors in Farnworth
- FD60 Fire Doorsets in Farnworth
- Acoustic Fire Doors in Farnworth
- Steel Fire Doors in Farnworth
- Flat Entrance Fire Doors in Farnworth
- Fire Door Supply & Fit in Farnworth
- FD30S Smoke Control Doorsets across Greater Manchester
- All fire doors in Farnworth