Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Heavitree

We supply and fit FD30S fire doors in Heavitree (EX1) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £800 per single doorset in Heavitree, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Heavitree

Need FD30S fire doors in Heavitree? We supply and fit complete certified doorsets across Devon, starting with a free measure survey in and around EX1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.

Heavitree is about 37 miles from Plymouth; we cover both, along with Exeter, Exmouth and Tiverton.

Fire door rules in Heavitree

In Heavitree, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Heavitree

Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Heavitree, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD30S fire doors are needed

Typical uses for FD30S fire doors in Heavitree include cross-corridor doors and lobby doors in blocks of flats.

Devon's demand comes from Plymouth's post-war city centre and naval estate, Exeter's offices and student housing, and coastal hotels.

  • Cross-corridor doors
  • Lobby doors in blocks of flats
  • Protected stairways
  • Integral garage doors

FD30S Smoke Control Doorsets: key specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Is the survey in Heavitree free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Which rules do FD30S fire doors in Heavitree need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Heavitree.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Also covering towns near Heavitree

Also available in Heavitree

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.