FD30S Smoke Control Doorsets for Irvine buildings
Getting FD30S fire doors right in Irvine means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whether your building is in central Irvine or on its edges towards Kilmarnock, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD30S fire doors in Ayrshire
Scotland has its own system: new and replacement fire doors in Irvine are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.
Guide prices in Irvine
Guide prices for FD30S fire doors in Irvine run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Irvine
In Irvine, FD30S fire doors are typically needed in lobby doors in blocks of flats and protected stairways.
Ayrshire's towns combine traditional housing and council estates with schools, hotels and industrial estates.
- Lobby doors in blocks of flats
- Protected stairways
- Cross-corridor doors
- Integral garage doors
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Ayrshire
Which rules do FD30S fire doors in Irvine need to meet?
They are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Irvine.
Will I get certificates for the doors fitted in Irvine?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
FD30S Smoke Control Doorsets near Irvine
- Kilmarnock (6 miles)
- Ayr (11 miles)
- Newton Mearns (16 miles)
- Paisley (17 miles)
- Renfrew (20 miles)
- East Kilbride (21 miles)
Other products in Irvine
- Fire Doors for Homes in Irvine
- Riser & Service Cupboard Doors in Irvine
- Fire Door Supply & Fit in Irvine
- Double & Leaf-and-a-Half Fire Doors in Irvine
- FD90 & FD120 Doorsets in Irvine
- Steel Fire Doors in Irvine
- Security Fire Doors in Irvine
- Communal & Corridor Fire Doors in Irvine
- FD30S Smoke Control Doorsets across Ayrshire
- All fire doors in Irvine