Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 / FD60Access controlVeneered

Commercial & Office Fire Doors in Argyll & Bute

We supply and fit commercial fire doors throughout Argyll & Bute, including Helensburgh and Oban, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £850 per single doorset in Argyll & Bute, supplied & fitted, ex VAT

Oak-veneered fire door with narrow vision panel in an office corridor

Commercial & Office Fire Doors for Argyll & Bute buildings

Across Argyll & Bute we handle commercial fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

Regulations for commercial fire doors in Argyll & Bute

In Argyll & Bute the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.

Cost of commercial fire doors in Argyll & Bute

Our guide for commercial fire doors is £850–£1,500 per single doorset fitted, ex VAT. Quotes for Argyll & Bute are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where commercial fire doors are needed

Argyll and Bute is largely rural and coastal, with hotels, schools and care homes in towns such as Helensburgh and Oban.

  • Office fit-outs
  • Retail units
  • Hotels
  • Restaurants and commercial kitchens

Doorset specification

RatingFD30 or FD30S typical; FD60 to cores and plant
FinishesOak, walnut or ash veneer, laminate, paint-grade
Access controlElectric locks and maglocks tested with the doorset
GlazingNarrow or full vision panels
ComplianceFire risk assessment under the fire safety law where the building is
Elevation drawing of commercial & office fire doors

See the full specification and options for Commercial & Office Fire Doors

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

How quickly can you survey in Argyll & Bute?

We arrange surveys around your access needs and, where possible, combine visits with other work in Argyll & Bute. Tell us your preferred dates when you enquire.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can I add access control to my fire doors?

Yes, using hardware covered by the doorset's evidence. Retro-fitting untested components can void certification.

Towns in Argyll & Bute we cover for commercial fire doors

Commercial & Office Fire Doors in neighbouring areas

Other fire doors in Argyll & Bute

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.