FD30 Fire Doorsets for Blackpool buildings
For landlords, managing agents, businesses and homeowners in Blackpool, we provide FD30 doorsets for flats, offices, HMOs and corridors with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Blackpool is about 14 miles from Preston. Wherever your building is in FY1, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Blackpool
In Blackpool, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD30 fire doors cost in Blackpool?
Our guide price for FD30 fire doors in Blackpool is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are used in Blackpool
Plant rooms and stores and offices and retail back-of-house are among the most common settings for FD30 fire doors, in Blackpool as elsewhere.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Plant rooms and stores
- Offices and retail back-of-house
- Hotel corridors
- HMO bedrooms and kitchens
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Which rules do FD30 fire doors in Blackpool need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Blackpool?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Blackpool?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Lancashire.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
Neighbouring areas
- Thornton-Cleveleys (4 miles)
- Lytham St Annes (6 miles)
- Fleetwood (7 miles)
- Southport (12 miles)
- Preston (14 miles)
- Leyland (17 miles)
Other products in Blackpool
- Glazed Fire Doors in Blackpool
- FD90 & FD120 Doorsets in Blackpool
- Stairwell & Escape Route Doors in Blackpool
- School & Healthcare Fire Doors in Blackpool
- Security Fire Doors in Blackpool
- Acoustic Fire Doors in Blackpool
- FD30S Smoke Control Doorsets in Blackpool
- Steel Fire Doors in Blackpool
- FD30 Fire Doorsets across Lancashire
- All fire doors in Blackpool