Our Kilburn supply and fit service
Getting FD30 fire doors right in Kilburn means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Kilburn is about 4 miles from London; we cover both, along with Cricklewood, Chalk Farm and Camden Town.
Fire door rules in Kilburn
Fire doors in Kilburn sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30 fire doors cost in Kilburn?
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Kilburn are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are needed
Typical uses for FD30 fire doors in Kilburn include offices and retail back-of-house and hotel corridors.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Offices and retail back-of-house
- Hotel corridors
- HMO bedrooms and kitchens
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you fit just one door in Kilburn?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
What does a Kilburn quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD30 fire doors in Kilburn need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Nearby towns we cover
- Cricklewood (1 mile)
- Chalk Farm (2 miles)
- Camden Town (2 miles)
- Willesden (2 miles)
- Archway (2 miles)
- Holloway (3 miles)
Also available in Kilburn
- FD30S Smoke Control Doorsets in Kilburn
- HMO Fire Doors in Kilburn
- Commercial & Office Fire Doors in Kilburn
- FD60 Fire Doorsets in Kilburn
- Security Fire Doors in Kilburn
- Fire Door Supply & Fit in Kilburn
- Fire Door Ironmongery & Closers in Kilburn
- Fire Exit Doors in Kilburn
- FD30 Fire Doorsets across Greater London
- All fire doors in Kilburn