FD30 fire doors in Bexley: how we work
If your fire risk assessment in Bexley has flagged doors to replace, we can schedule, quote and fit FD30 doorsets for flats, offices, HMOs and corridors to match its recommendations. Surveys in DA5 are free and quotes are fixed and itemised.
Where possible we combine Bexley surveys with other visits in Greater London, such as Welling and Dartford, which helps keep survey dates flexible.
What the law says in Bexley
Because Bexley is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD30 fire doors cost in Bexley?
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Bexley quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Bexley
Plant rooms and stores and HMO bedrooms and kitchens are among the most common settings for FD30 fire doors, in Bexley as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant rooms and stores
- HMO bedrooms and kitchens
- Offices and retail back-of-house
- Hotel corridors
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Can you fit just one door in Bexley?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
What does a Bexley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Bexley free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Also covering towns near Bexley
- Welling (2 miles)
- Dartford (3 miles)
- Swanley (3 miles)
- Eltham (4 miles)
- Thamesmead (4 miles)
- Blackheath (6 miles)
More doorsets for Bexley
- Fire Doors for Homes in Bexley
- Stairwell & Escape Route Doors in Bexley
- Riser & Service Cupboard Doors in Bexley
- Steel Fire Doors in Bexley
- Security Fire Doors in Bexley
- FD90 & FD120 Doorsets in Bexley
- FD60 Fire Doorsets in Bexley
- Fire Door Supply & Fit in Bexley
- FD30 Fire Doorsets across Greater London
- All fire doors in Bexley