Our Consett supply and fit service
Getting FD30 fire doors right in Consett means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover DH8 and the surrounding area, including Stanley. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Consett
Because Consett is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD30 fire doors prices in Consett
Budget around £750 to £1,150 per single doorset for FD30 fire doors supplied and fitted in Consett, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30 fire doors
In Consett, FD30 fire doors are typically needed in hotel corridors and plant rooms and stores.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in County Durham
Do you cover Consett?
Yes. We survey, supply and fit FD30 fire doors throughout Consett and the rest of County Durham, including DH8 and nearby Stanley.
Is the survey in Consett free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Consett?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is FD30 the same as E30?
Broadly, yes. FD30 comes from the British test (BS 476-22); E30 is the European classification from BS EN 1634-1. Both mean 30 minutes of integrity. EI30 adds insulation, which some locations and glazed doors need.
Nearby towns we cover
- Stanley (6 miles)
- Newburn (10 miles)
- Chester-le-Street (10 miles)
- Durham (12 miles)
- Gateshead (12 miles)
- Newcastle upon Tyne (12 miles)
Other products in Consett
- Fire Exit Doors in Consett
- Communal & Corridor Fire Doors in Consett
- FD90 & FD120 Doorsets in Consett
- Composite Fire Doors in Consett
- Commercial & Office Fire Doors in Consett
- Stairwell & Escape Route Doors in Consett
- Fire Door Ironmongery & Closers in Consett
- Riser & Service Cupboard Doors in Consett
- FD30 Fire Doorsets across County Durham
- All fire doors in Consett