FD30 fire doors in Warrington | Supplied & Fitted

FD30 Fire Doorsets for Warrington buildings

Getting FD30 fire doors right in Warrington means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

We cover Warrington and the rest of Cheshire, with surveys arranged around your building's access and occupancy.

Regulations for FD30 fire doors in Cheshire

In Warrington, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD30 fire doors cost in Warrington?

Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Warrington are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30 fire doors are used in Warrington

Typical uses for FD30 fire doors in Warrington include plant rooms and stores and hotel corridors.

Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.

Plant rooms and stores
Hotel corridors
Offices and retail back-of-house
HMO bedrooms and kitchens

FD30 Fire Doorsets: key specification

Fire resistance	30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf	44mm timber, flush or with vision panel
Test evidence	BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
Closer	Overhead closer to BS EN 1154 (except locked cupboards)
Hinges	Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical

See the full specification and options for FD30 Fire Doorsets

Four steps to compliant doors

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Questions about FD30 fire doors in Warrington

Can you work around tenants or staff in Warrington?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Will I get certificates for the doors fitted in Warrington?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you work for landlords and managing agents in Warrington?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Can I fit an FD30 door into my existing frame?

Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.

FD30 Fire Doorsets in Warrington