FD30 fire doors in Runcorn | Supplied & Fitted

Our Runcorn supply and fit service

Getting FD30 fire doors right in Runcorn means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Runcorn is about 7 miles from Warrington; we cover both, along with Widnes, Halewood and Speke.

What the law says in Runcorn

New and replacement fire doors in Runcorn are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

What do FD30 fire doors cost in Runcorn?

Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Runcorn quote is fixed after survey and itemised door by door.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where FD30 fire doors are needed

Wherever they are in Runcorn, FD30 fire doors are most often specified for offices and retail back-of-house and plant rooms and stores.

Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.

Offices and retail back-of-house
Plant rooms and stores
Hotel corridors
HMO bedrooms and kitchens

FD30 Fire Doorsets: key specification

Fire resistance	30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf	44mm timber, flush or with vision panel
Test evidence	BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
Closer	Overhead closer to BS EN 1154 (except locked cupboards)
Hinges	Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical

See the full specification and options for FD30 Fire Doorsets

How it works in Runcorn

Tell us about the doors — photos help
Free measure survey at your Runcorn property
Door-by-door schedule and fixed price
Installation and handover pack

Your questions answered

Can you fit just one door in Runcorn?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Cheshire.

Will I get certificates for the doors fitted in Runcorn?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Runcorn.

Can I fit an FD30 door into my existing frame?

Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.

FD30 Fire Doorsets in Runcorn