FD30 Fire Doorsets for Amersham buildings
Fire Rated Doors supplies and fits FD30 fire doors in Amersham, Buckinghamshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover HP7 and the surrounding area, including Chesham. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Amersham
Fire doors in Amersham sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD30 fire doors prices in Amersham
Our guide price for FD30 fire doors in Amersham is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Amersham
In Amersham, FD30 fire doors are typically needed in plant rooms and stores and offices and retail back-of-house.
Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Can you fit just one door in Amersham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Buckinghamshire.
Will I get certificates for the doors fitted in Amersham?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Amersham?
Yes. We survey, supply and fit FD30 fire doors throughout Amersham and the rest of Buckinghamshire, including HP7 and nearby Chesham.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Nearby towns we cover
- Chesham (2 miles)
- Chalfont St Peter (5 miles)
- Gerrards Cross (6 miles)
- High Wycombe (6 miles)
- Rickmansworth (6 miles)
- Berkhamsted (7 miles)
Also available in Amersham
- Steel Fire Doors in Amersham
- Flat Entrance Fire Doors in Amersham
- Fire Door Replacement in Amersham
- Fire-Rated Screens & Fanlights in Amersham
- Stairwell & Escape Route Doors in Amersham
- HMO Fire Doors in Amersham
- FD60 Fire Doorsets in Amersham
- Riser & Service Cupboard Doors in Amersham
- FD30 Fire Doorsets across Buckinghamshire
- All fire doors in Amersham