Getting FD30 fire doors fitted in Oban
Fire Rated Doors supplies and fits FD30 fire doors in Oban, Argyll & Bute. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Oban or on its edges towards Helensburgh, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Oban
In Oban the building standards come from the Scottish Technical Handbooks rather than Approved Document B, and existing non-domestic premises fall under the Fire (Scotland) Act 2005. We specify doorsets against the Scottish requirements and your fire risk assessment.
FD30 fire doors prices in Oban
Our guide price for FD30 fire doors in Oban is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30 fire doors are used in Oban
Wherever they are in Oban, FD30 fire doors are most often specified for hotel corridors and offices and retail back-of-house.
Argyll and Bute is largely rural and coastal, with hotels, schools and care homes in towns such as Helensburgh and Oban.
- Hotel corridors
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Plant rooms and stores
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Argyll & Bute
Is the survey in Oban free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Oban?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Oban.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Nearby towns we cover
- Helensburgh (40 miles)
- Greenock (42 miles)
- Vale of Leven (46 miles)
- Clydebank (54 miles)
- Bearsden (56 miles)
- Renfrew (56 miles)
More doorsets for Oban
- Fire Exit Doors in Oban
- Fire Door Replacement in Oban
- FD60 Fire Doorsets in Oban
- Stairwell & Escape Route Doors in Oban
- Flat Entrance Fire Doors in Oban
- Double & Leaf-and-a-Half Fire Doors in Oban
- Fire-Rated Screens & Fanlights in Oban
- Timber Fire Doorsets in Oban
- FD30 Fire Doorsets across Argyll & Bute
- All fire doors in Oban