Commercial & Office Fire Doors for Derby buildings
Getting commercial fire doors right in Derby means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Derby is one of the main towns we cover in Derbyshire; tell us your dates and we'll arrange a survey.
Which rules apply in Derby?
In Derby, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do commercial fire doors cost in Derby?
Our guide for commercial fire doors is £850–£1,500 per single doorset fitted, ex VAT. Quotes for Derby are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where commercial fire doors are needed
In Derby, commercial fire doors are typically needed in hotels and restaurants and commercial kitchens.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Hotels
- Restaurants and commercial kitchens
- Retail units
- Office fit-outs
Commercial & Office Fire Doors: key specification
| Rating | FD30 or FD30S typical; FD60 to cores and plant |
|---|---|
| Finishes | Oak, walnut or ash veneer, laminate, paint-grade |
| Access control | Electric locks and maglocks tested with the doorset |
| Glazing | Narrow or full vision panels |
| Compliance | Fire risk assessment under the fire safety law where the building is |
See the full specification and options for Commercial & Office Fire Doors
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about commercial fire doors in Derby
Do you cover Derby?
Yes. We survey, supply and fit commercial fire doors throughout Derby and the rest of Derbyshire, including DE1 and nearby Belper.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Derby.
Which rules do commercial fire doors in Derby need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do office fire doors need vision panels?
Doors across corridors and doors that swing into circulation routes usually should, for safety and accessibility.
Nearby towns we cover
- Belper (7 miles)
- Ilkeston (7 miles)
- Heanor (8 miles)
- Ripley (8 miles)
- Long Eaton (9 miles)
- Burton upon Trent (11 miles)
Other products in Derby
- Fire-Rated Screens & Fanlights in Derby
- Riser & Service Cupboard Doors in Derby
- FD60 Fire Doorsets in Derby
- Stairwell & Escape Route Doors in Derby
- School & Healthcare Fire Doors in Derby
- Security Fire Doors in Derby
- FD30S Smoke Control Doorsets in Derby
- FD30 Fire Doorsets in Derby
- Commercial & Office Fire Doors across Derbyshire
- All fire doors in Derby