Certified commercial fire doors for Dunstable
We fit commercial and office fire doorsets in Dunstable and the rest of Bedfordshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whether your building is in central Dunstable or on its edges towards Luton, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for commercial fire doors in Bedfordshire
Because Dunstable is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Commercial fire doors prices in Dunstable
Guide prices for commercial fire doors in Dunstable run from about £850 to £1,500 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where commercial fire doors are used in Dunstable
In Dunstable, commercial fire doors are typically needed in retail units and office fit-outs.
Bedfordshire mixes Luton's dense housing and town-centre flats with Bedford's Victorian terraces, many now converted to flats and HMOs.
- Retail units
- Office fit-outs
- Hotels
- Restaurants and commercial kitchens
What's in the doorset
| Rating | FD30 or FD30S typical; FD60 to cores and plant |
|---|---|
| Finishes | Oak, walnut or ash veneer, laminate, paint-grade |
| Access control | Electric locks and maglocks tested with the doorset |
| Glazing | Narrow or full vision panels |
| Compliance | Fire risk assessment under the fire safety law where the building is |
See the full specification and options for Commercial & Office Fire Doors
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about commercial fire doors in Dunstable
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Dunstable.
Do you cover Dunstable?
Yes. We survey, supply and fit commercial fire doors throughout Dunstable and the rest of Bedfordshire, including LU6 and nearby Luton.
What does a Dunstable quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do office fire doors need vision panels?
Doors across corridors and doors that swing into circulation routes usually should, for safety and accessibility.
Commercial & Office Fire Doors near Dunstable
- Luton (4 miles)
- Leighton Buzzard (6 miles)
- Harpenden (9 miles)
- Berkhamsted (9 miles)
- Hemel Hempstead (10 miles)
- Ampthill (10 miles)
More doorsets for Dunstable
- Riser & Service Cupboard Doors in Dunstable
- FD90 & FD120 Doorsets in Dunstable
- Stairwell & Escape Route Doors in Dunstable
- Glazed Fire Doors in Dunstable
- Fire Door Supply & Fit in Dunstable
- Double & Leaf-and-a-Half Fire Doors in Dunstable
- Composite Fire Doors in Dunstable
- School & Healthcare Fire Doors in Dunstable
- Commercial & Office Fire Doors across Bedfordshire
- All fire doors in Dunstable