Timber Fire Doorsets for Long Eaton buildings
If your fire risk assessment in Long Eaton has flagged doors to replace, we can schedule, quote and fit timber fire doorsets in paint, laminate and veneer to match its recommendations. Surveys in NG10 are free and quotes are fixed and itemised.
Long Eaton is about 9 miles from Derby. Wherever your building is in NG10, we arrange survey and fitting dates around access and occupancy.
Regulations for timber fire doors in Derbyshire
Fire doors in Long Eaton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do timber fire doors cost in Long Eaton?
Expect roughly £750–£1,600 per single doorset for timber fire doors, fitted, ex VAT. Your Long Eaton quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Long Eaton
Flats and HMOs and offices and hotels are among the most common settings for timber fire doors, in Long Eaton as elsewhere.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Flats and HMOs
- Offices and hotels
- Period buildings needing bespoke sizes
- Schools and care homes
Timber Fire Doorsets: key specification
| Ratings | FD30, FD30S, FD60, FD60S |
|---|---|
| Faces | Primed, pre-painted, laminate, oak, ash, walnut and other veneers |
| Frames | Hardwood or engineered frames to match |
| Sizes | Standard and made-to-measure |
| Code of practice | BS 8214:2026 |
See the full specification and options for Timber Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Derbyshire
Can you fit just one door in Long Eaton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Derbyshire.
Is the survey in Long Eaton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Long Eaton.
Can a timber fire door be trimmed on site?
Only within the limits the manufacturer's evidence allows, usually a few millimetres. We prefer made-to-measure doorsets so no trimming is needed.
Also covering towns near Long Eaton
- Ilkeston (5 miles)
- Nottingham (6 miles)
- West Bridgford (6 miles)
- Heanor (9 miles)
- Derby (9 miles)
- Arnold (9 miles)
More doorsets for Long Eaton
- Fire Exit Doors in Long Eaton
- Fire-Rated Screens & Fanlights in Long Eaton
- FD30 Fire Doorsets in Long Eaton
- FD30S Smoke Control Doorsets in Long Eaton
- Commercial & Office Fire Doors in Long Eaton
- Communal & Corridor Fire Doors in Long Eaton
- Glazed Fire Doors in Long Eaton
- Double & Leaf-and-a-Half Fire Doors in Long Eaton
- Timber Fire Doorsets across Derbyshire
- All fire doors in Long Eaton