Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 typicalKeep lockedFlush

Riser & Service Cupboard Doors in Hawick

We supply and fit riser cupboard fire doors in Hawick (TD9) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £550 per single doorset in Hawick, supplied & fitted, ex VAT

Flush painted service riser cupboard door set into a corridor wall

Our Hawick supply and fit service

We fit fire-rated riser and service cupboard doors in Hawick and the rest of Scottish Borders. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.

Surveys in Hawick are booked around your access needs, and we cover the wider Scottish Borders area too.

Regulations for riser cupboard fire doors in Scottish Borders

Scotland has its own system: new and replacement fire doors in Hawick are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.

What do riser cupboard fire doors cost in Hawick?

Our guide for riser cupboard fire doors is £550–£950 per single doorset fitted, ex VAT. Quotes for Hawick are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in Hawick

Meter cupboards and electrical and data risers are among the most common settings for riser cupboard fire doors, in Hawick as elsewhere.

The Scottish Borders' textile towns, schools, care homes and hotels make up most fire door work in the region.

  • Meter cupboards
  • Electrical and data risers
  • Plumbing ducts
  • Bin and store cupboards

Doorset specification

RatingAt least half the shaft wall's rating, 30 minutes minimum — FD30 typical
ClosingKept locked shut; self-closer not normally required
LockingFlush cylinder or budget lock, tested with the door
FinishFlush, painted or laminated to match the corridor
SignageFire door keep locked
Elevation drawing of riser & service cupboard doors

See the full specification and options for Riser & Service Cupboard Doors

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Scottish Borders

What does a Hawick quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Will I get certificates for the doors fitted in Hawick?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Hawick?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What rating does a riser door need?

In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.

Nearby towns we cover

Also available in Hawick

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.