Our Fleet supply and fit service
If your fire risk assessment in Fleet has flagged doors to replace, we can schedule, quote and fit fire-rated riser and service cupboard doors to match its recommendations. Surveys in GU51 are free and quotes are fixed and itemised.
We cover GU51 and the surrounding area, including Farnborough. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Fleet
Because Fleet is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Fleet
Our guide price for riser cupboard fire doors in Fleet is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Fleet
In Fleet, riser cupboard fire doors are typically needed in meter cupboards and electrical and data risers.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Meter cupboards
- Electrical and data risers
- Plumbing ducts
- Bin and store cupboards
Doorset specification
| Rating | At least half the shaft wall's rating, 30 minutes minimum — FD30 typical |
|---|---|
| Closing | Kept locked shut; self-closer not normally required |
| Locking | Flush cylinder or budget lock, tested with the door |
| Finish | Flush, painted or laminated to match the corridor |
| Signage | Fire door keep locked |
See the full specification and options for Riser & Service Cupboard Doors
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Fleet.
How quickly can you survey in Fleet?
We arrange surveys around your access needs and, where possible, combine Fleet visits with other work in Hampshire. Tell us your preferred dates when you enquire.
Can you work around tenants or staff in Fleet?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you fire-stop the riser itself?
Fire-stopping is specialist work outside our doorset scope, but we report gaps we see so you can get them addressed.
Riser & Service Cupboard Doors near Fleet
- Farnborough (4 miles)
- Aldershot (4 miles)
- Yateley (4 miles)
- Sandhurst (5 miles)
- Farnham (5 miles)
- Camberley (6 miles)
Also available in Fleet
- FD30 Fire Doorsets in Fleet
- Security Fire Doors in Fleet
- Fire Door Supply & Fit in Fleet
- Fire Exit Doors in Fleet
- Commercial & Office Fire Doors in Fleet
- Fire Door Ironmongery & Closers in Fleet
- Double & Leaf-and-a-Half Fire Doors in Fleet
- Fire Door Replacement in Fleet
- Riser & Service Cupboard Doors across Hampshire
- All fire doors in Fleet