Our Rhondda supply and fit service
Fire Rated Doors supplies and fits flat entrance fire doors in Rhondda, Mid Glamorgan. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Surveys in Rhondda are booked around your access needs, and we cover the wider Mid Glamorgan area too.
What the law says in Rhondda
In Rhondda the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Cost of flat entrance fire doors in Mid Glamorgan
Our guide for flat entrance fire doors is £1,250–£2,300 per door fitted, ex VAT. Quotes for Rhondda are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Rhondda
In Rhondda, flat entrance fire doors are typically needed in supported housing and blocks of flats.
The valleys towns of Mid Glamorgan have extensive terraced housing, schools and public buildings, with Bridgend adding industrial estates.
- Supported housing
- Blocks of flats
- Student and build-to-rent blocks
- Converted buildings with shared stairs
Flat Entrance Fire Doors: key specification
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you cover Rhondda?
Yes. We survey, supply and fit flat entrance fire doors throughout Rhondda and the rest of Mid Glamorgan, including CF43 and nearby Tonypandy.
Is the survey in Rhondda free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Rhondda.
How long does fitting take?
A single flat entrance doorset usually takes a few hours to fit, including the new frame. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Neighbouring areas
- Tonypandy (2 miles)
- Aberdare (4 miles)
- Pontypridd (6 miles)
- Merthyr Tydfil (7 miles)
- Maesteg (9 miles)
- Caerphilly (11 miles)
Other products in Rhondda
- FD30S Smoke Control Doorsets in Rhondda
- Glazed Fire Doors in Rhondda
- Composite Fire Doors in Rhondda
- Riser & Service Cupboard Doors in Rhondda
- FD60 Fire Doorsets in Rhondda
- Fire Door Ironmongery & Closers in Rhondda
- Timber Fire Doorsets in Rhondda
- Fire Door Replacement in Rhondda
- Flat Entrance Fire Doors across Mid Glamorgan
- All fire doors in Rhondda