Our Sandown supply and fit service
We fit FD30S flat entrance doors for blocks of flats in Sandown and the rest of Isle of Wight. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover PO36 and the surrounding area, including Ryde. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Sandown
Because Sandown is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do flat entrance fire doors cost in Sandown?
Our guide price for flat entrance fire doors in Sandown is £1,250 to £2,300 per door including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where flat entrance fire doors are used in Sandown
In Sandown, flat entrance fire doors are typically needed in converted buildings with shared stairs and supported housing.
The Isle of Wight's hotels, holiday accommodation and care homes make up much of its fire door work, alongside town-centre flats.
- Converted buildings with shared stairs
- Supported housing
- Blocks of flats
- Student and build-to-rent blocks
Doorset specification
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
How it works in Sandown
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Is the survey in Sandown free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Sandown?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Sandown quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Who is responsible for flat front fire doors?
Usually the freeholder or managing agent as the responsible person, but leases vary — some make the leaseholder responsible for the door. Either way, it falls within the building's fire risk assessment.
Neighbouring areas
- Ryde (6 miles)
- Newport, Isle of Wight (7 miles)
- Cowes (10 miles)
- Gosport (10 miles)
- Portsmouth (11 miles)
- Fareham (14 miles)
Other products in Sandown
- Fire Door Replacement in Sandown
- Timber Fire Doorsets in Sandown
- School & Healthcare Fire Doors in Sandown
- Stairwell & Escape Route Doors in Sandown
- Composite Fire Doors in Sandown
- Fire Exit Doors in Sandown
- FD90 & FD120 Doorsets in Sandown
- Fire Door Supply & Fit in Sandown
- Flat Entrance Fire Doors across Isle of Wight
- All fire doors in Sandown