Fire door closers and ironmongery in Aldridge: how we work
If your fire risk assessment in Aldridge has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in WS9 are free and quotes are fixed and itemised.
Whether your building is in central Aldridge or on its edges towards Walsall, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Aldridge
New and replacement fire doors in Aldridge are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Aldridge?
Our guide price for fire door closers and ironmongery in Aldridge is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Aldridge include seal and signage replacement and access control preparation.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Seal and signage replacement
- Access control preparation
- Busy corridors needing hold-open
- Failed closers and hinges
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in West Midlands
Can you work around tenants or staff in Aldridge?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Aldridge?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Aldridge quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Walsall (3 miles)
- Bloxwich (4 miles)
- Sutton Coldfield (5 miles)
- Burntwood (5 miles)
- Wednesbury (6 miles)
- Willenhall (6 miles)
More doorsets for Aldridge
- Commercial & Office Fire Doors in Aldridge
- FD30 Fire Doorsets in Aldridge
- Stairwell & Escape Route Doors in Aldridge
- Communal & Corridor Fire Doors in Aldridge
- FD90 & FD120 Doorsets in Aldridge
- Fire-Rated Screens & Fanlights in Aldridge
- Flat Entrance Fire Doors in Aldridge
- HMO Fire Doors in Aldridge
- Fire Door Ironmongery & Closers across West Midlands
- All fire doors in Aldridge