Fire Door Ironmongery & Closers for Clevedon buildings
We fit fire door closers, hinges and hold-open devices in Clevedon and the rest of Somerset. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Clevedon surveys with other visits in Somerset, such as Nailsea and Portishead, which helps keep survey dates flexible.
What the law says in Clevedon
New and replacement fire doors in Clevedon are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Clevedon?
Guide prices for fire door closers and ironmongery in Clevedon run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need fire door closers and ironmongery
Failed closers and hinges and busy corridors needing hold-open are among the most common settings for fire door closers and ironmongery, in Clevedon as elsewhere.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
- Seal and signage replacement
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Somerset
What does a Clevedon quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Clevedon.
Which rules do fire door closers and ironmongery in Clevedon need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Fire Door Ironmongery & Closers near Clevedon
- Nailsea (4 miles)
- Portishead (5 miles)
- Weston-super-Mare (9 miles)
- Bristol (11 miles)
- Newport, Gwent (12 miles)
- Penarth (14 miles)
Also available in Clevedon
- Steel Fire Doors in Clevedon
- Glazed Fire Doors in Clevedon
- Double & Leaf-and-a-Half Fire Doors in Clevedon
- Fire Door Replacement in Clevedon
- Timber Fire Doorsets in Clevedon
- Fire Doors for Homes in Clevedon
- HMO Fire Doors in Clevedon
- Riser & Service Cupboard Doors in Clevedon
- Fire Door Ironmongery & Closers across Somerset
- All fire doors in Clevedon