Our Didcot supply and fit service
Fire Rated Doors supplies and fits fire door closers and ironmongery in Didcot, Oxfordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Didcot is about 10 miles from Oxford; we cover both, along with Abingdon, Oxford and Thatcham.
What the law says in Didcot
New and replacement fire doors in Didcot are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of fire door closers and ironmongery in Oxfordshire
Our guide price for fire door closers and ironmongery in Didcot is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are used in Didcot
Access control preparation and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Didcot as elsewhere.
Oxfordshire combines Oxford's colleges, labs and student housing with science parks and growing towns such as Bicester and Didcot.
- Access control preparation
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Didcot
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Fire door closers and ironmongery in Didcot: questions
Is the survey in Didcot free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Didcot?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Didcot?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Didcot and the rest of Oxfordshire, including OX11 and nearby Abingdon.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Abingdon (4 miles)
- Oxford (10 miles)
- Thatcham (14 miles)
- Newbury (15 miles)
- Reading (16 miles)
- Witney (16 miles)
Other fire doors in Didcot
- Composite Fire Doors in Didcot
- Fire Doors for Homes in Didcot
- Fire Door Supply & Fit in Didcot
- Flat Entrance Fire Doors in Didcot
- Acoustic Fire Doors in Didcot
- FD30S Smoke Control Doorsets in Didcot
- Riser & Service Cupboard Doors in Didcot
- School & Healthcare Fire Doors in Didcot
- Fire Door Ironmongery & Closers across Oxfordshire
- All fire doors in Didcot