Certified fire door closers and ironmongery for Spalding
Looking for fire door closers and ironmongery in Spalding? Our supply and fit service covers PE11 and the surrounding area, including Boston and Peterborough. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Spalding is about 34 miles from Lincoln. Wherever your building is in PE11, we arrange survey and fitting dates around access and occupancy.
What the law says in Spalding
New and replacement fire doors in Spalding are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Spalding?
Our guide price for fire door closers and ironmongery in Spalding is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Spalding include failed closers and hinges and busy corridors needing hold-open.
Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
- Seal and signage replacement
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Spalding
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Lincolnshire
Do you work for landlords and managing agents in Spalding?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Will I get certificates for the doors fitted in Spalding?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Spalding free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Nearby towns we cover
- Boston (14 miles)
- Peterborough (16 miles)
- Wisbech (16 miles)
- Stamford (17 miles)
- March (19 miles)
- Grantham (22 miles)
Other fire doors in Spalding
- Acoustic Fire Doors in Spalding
- HMO Fire Doors in Spalding
- Fire Door Replacement in Spalding
- Glazed Fire Doors in Spalding
- FD30S Smoke Control Doorsets in Spalding
- Flat Entrance Fire Doors in Spalding
- Commercial & Office Fire Doors in Spalding
- Composite Fire Doors in Spalding
- Fire Door Ironmongery & Closers across Lincolnshire
- All fire doors in Spalding