Certified fire door closers and ironmongery for Lytham St Annes
If your fire risk assessment in Lytham St Annes has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in FY8 are free and quotes are fixed and itemised.
Lytham St Annes is about 12 miles from Preston. Wherever your building is in FY8, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Lytham St Annes?
New and replacement fire doors in Lytham St Annes are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Lytham St Annes
Our guide price for fire door closers and ironmongery in Lytham St Annes is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Lytham St Annes
Typical uses for fire door closers and ironmongery in Lytham St Annes include seal and signage replacement and busy corridors needing hold-open.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
- Failed closers and hinges
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Which rules do fire door closers and ironmongery in Lytham St Annes need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Lytham St Annes?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Lytham St Annes quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Blackpool (6 miles)
- Southport (7 miles)
- Thornton-Cleveleys (9 miles)
- Preston (12 miles)
- Fleetwood (12 miles)
- Leyland (13 miles)
Other fire doors in Lytham St Annes
- Timber Fire Doorsets in Lytham St Annes
- Flat Entrance Fire Doors in Lytham St Annes
- FD90 & FD120 Doorsets in Lytham St Annes
- Fire Door Supply & Fit in Lytham St Annes
- Security Fire Doors in Lytham St Annes
- FD30 Fire Doorsets in Lytham St Annes
- School & Healthcare Fire Doors in Lytham St Annes
- FD30S Smoke Control Doorsets in Lytham St Annes
- Fire Door Ironmongery & Closers across Lancashire
- All fire doors in Lytham St Annes