Getting fire door closers and ironmongery fitted in Portslade
Need fire door closers and ironmongery in Portslade? We supply and fit complete certified doorsets across East Sussex, starting with a free measure survey in and around BN41. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Portslade is about 4 miles from Brighton. Wherever your building is in BN41, we arrange survey and fitting dates around access and occupancy.
What the law says in Portslade
Because Portslade is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Fire door closers and ironmongery prices in Portslade
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Portslade quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are used in Portslade
Wherever they are in Portslade, fire door closers and ironmongery are most often specified for failed closers and hinges and seal and signage replacement.
Brighton and Hove's converted Regency and Victorian houses make it one of England's biggest HMO and flat-conversion markets; Eastbourne and Hastings add hotels and care homes.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Fire door closers and ironmongery in Portslade: questions
Can you work around tenants or staff in Portslade?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Portslade.
Do you work for landlords and managing agents in Portslade?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Nearby towns we cover
- Hove (2 miles)
- Brighton (4 miles)
- Worthing (7 miles)
- Rottingdean (7 miles)
- Burgess Hill (9 miles)
- Haywards Heath (12 miles)
Other products in Portslade
- Stairwell & Escape Route Doors in Portslade
- FD90 & FD120 Doorsets in Portslade
- Double & Leaf-and-a-Half Fire Doors in Portslade
- Security Fire Doors in Portslade
- FD30 Fire Doorsets in Portslade
- Commercial & Office Fire Doors in Portslade
- Steel Fire Doors in Portslade
- FD60 Fire Doorsets in Portslade
- Fire Door Ironmongery & Closers across East Sussex
- All fire doors in Portslade