FD90 and FD120 fire doors in Southport: how we work
We cover Southport and nearby Formby for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Our Merseyside coverage includes Southport and its neighbours Formby, Lytham St Annes and Ormskirk; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Merseyside
Because Southport is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Merseyside
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Southport quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Southport include separating walls with long ratings and high fire-load stores.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Merseyside
Which rules do FD90 and FD120 fire doors in Southport need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Southport?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Southport?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Merseyside.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Also covering towns near Southport
- Formby (6 miles)
- Lytham St Annes (7 miles)
- Ormskirk (7 miles)
- Maghull (9 miles)
- Skelmersdale (12 miles)
- Blackpool (12 miles)
Other fire doors in Southport
- Stairwell & Escape Route Doors in Southport
- Fire Door Replacement in Southport
- Fire Exit Doors in Southport
- School & Healthcare Fire Doors in Southport
- Security Fire Doors in Southport
- FD30S Smoke Control Doorsets in Southport
- Commercial & Office Fire Doors in Southport
- Riser & Service Cupboard Doors in Southport
- FD90 & FD120 Doorsets across Merseyside
- All fire doors in Southport