Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Prescot

We supply and fit FD90 and FD120 fire doors in Prescot (L34) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,900 per single doorset in Prescot, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Getting FD90 and FD120 fire doors fitted in Prescot

Looking for FD90 and FD120 fire doors in Prescot? Our supply and fit service covers L34 and the surrounding area, including Huyton and St Helens. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

Prescot is about 7 miles from Liverpool; we cover both, along with Huyton, St Helens and Halewood.

Regulations for FD90 and FD120 fire doors in Merseyside

In Prescot, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Cost of FD90 and FD120 fire doors in Merseyside

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Prescot quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD90 and FD120 fire doors

Typical uses for FD90 and FD120 fire doors in Prescot include separating walls with long ratings and high fire-load stores.

Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.

  • Separating walls with long ratings
  • High fire-load stores
  • Generator rooms
  • Transformer and switch rooms

What's in the doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Will I get certificates for the doors fitted in Prescot?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules do FD90 and FD120 fire doors in Prescot need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you cover Prescot?

Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Prescot and the rest of Merseyside, including L34 and nearby Huyton.

Can FD120 doors have glass?

Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.

FD90 & FD120 Doorsets near Prescot

Other products in Prescot

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.