Getting FD90 and FD120 fire doors fitted in Birkenhead
If your fire risk assessment in Birkenhead has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in CH41 are free and quotes are fixed and itemised.
Whether your building is in central Birkenhead or on its edges towards Liverpool, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Birkenhead
New and replacement fire doors in Birkenhead are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD90 and FD120 fire doors in Merseyside
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Birkenhead quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Birkenhead include separating walls with long ratings and high fire-load stores.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Birkenhead
What does a Birkenhead quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Birkenhead?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you work for landlords and managing agents in Birkenhead?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Liverpool (2 miles)
- Wallasey (3 miles)
- Bebington (3 miles)
- Bootle (5 miles)
- Litherland (6 miles)
- Heswall (6 miles)
More doorsets for Birkenhead
- Riser & Service Cupboard Doors in Birkenhead
- Glazed Fire Doors in Birkenhead
- Fire-Rated Screens & Fanlights in Birkenhead
- Timber Fire Doorsets in Birkenhead
- FD60 Fire Doorsets in Birkenhead
- HMO Fire Doors in Birkenhead
- Composite Fire Doors in Birkenhead
- School & Healthcare Fire Doors in Birkenhead
- FD90 & FD120 Doorsets across Merseyside
- All fire doors in Birkenhead