Getting FD90 and FD120 fire doors fitted in Hamilton
Getting FD90 and FD120 fire doors right in Hamilton means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Hamilton surveys with other visits in Lanarkshire, such as Motherwell and Wishaw, which helps keep survey dates flexible.
Regulations for FD90 and FD120 fire doors in Lanarkshire
Fire doors in Hamilton follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
What do FD90 and FD120 fire doors cost in Hamilton?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Hamilton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
High fire-load stores and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in Hamilton as elsewhere.
Lanarkshire's new towns and former industrial towns have large estates, schools and business parks.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Hamilton: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hamilton.
How quickly can you survey in Hamilton?
We arrange surveys around your access needs and, where possible, combine Hamilton visits with other work in Lanarkshire. Tell us your preferred dates when you enquire.
Do you work for landlords and managing agents in Hamilton?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Hamilton
- Motherwell (2 miles)
- Wishaw (4 miles)
- East Kilbride (6 miles)
- Cambuslang (6 miles)
- Coatbridge (7 miles)
- Airdrie (7 miles)
More doorsets for Hamilton
- Acoustic Fire Doors in Hamilton
- Communal & Corridor Fire Doors in Hamilton
- Stairwell & Escape Route Doors in Hamilton
- School & Healthcare Fire Doors in Hamilton
- Fire Exit Doors in Hamilton
- Security Fire Doors in Hamilton
- Fire Door Ironmongery & Closers in Hamilton
- Commercial & Office Fire Doors in Hamilton
- FD90 & FD120 Doorsets across Lanarkshire
- All fire doors in Hamilton