Certified FD90 and FD120 fire doors for Whitefield
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Whitefield and the rest of Greater Manchester. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whitefield is about 6 miles from Manchester. Wherever your building is in M45, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Whitefield
In Whitefield, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Greater Manchester
Our guide price for FD90 and FD120 fire doors in Whitefield is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Whitefield include separating walls with long ratings and transformer and switch rooms.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD90 and FD120 fire doors in Whitefield
Do you work for landlords and managing agents in Whitefield?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Whitefield?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Whitefield?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Radcliffe (1 mile)
- Prestwich (1 mile)
- Bury (4 miles)
- Swinton (4 miles)
- Middleton (4 miles)
- Farnworth (4 miles)
More doorsets for Whitefield
- FD30S Smoke Control Doorsets in Whitefield
- Steel Fire Doors in Whitefield
- FD30 Fire Doorsets in Whitefield
- Riser & Service Cupboard Doors in Whitefield
- Flat Entrance Fire Doors in Whitefield
- Fire Door Ironmongery & Closers in Whitefield
- Composite Fire Doors in Whitefield
- Fire Doors for Homes in Whitefield
- FD90 & FD120 Doorsets across Greater Manchester
- All fire doors in Whitefield