FD90 and FD120 fire doors in Bletchley: how we work
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Bletchley, Buckinghamshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Bletchley surveys with other visits in Buckinghamshire, such as Milton Keynes and Leighton Buzzard, which helps keep survey dates flexible.
Regulations for FD90 and FD120 fire doors in Buckinghamshire
New and replacement fire doors in Bletchley are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD90 and FD120 fire doors cost in Bletchley?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Bletchley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are used in Bletchley
Separating walls with long ratings and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Bletchley as elsewhere.
Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Bletchley
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Buckinghamshire
Which rules do FD90 and FD120 fire doors in Bletchley need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Bletchley?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Bletchley?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Bletchley
- Milton Keynes (4 miles)
- Leighton Buzzard (6 miles)
- Ampthill (11 miles)
- Dunstable (12 miles)
- Aylesbury (12 miles)
- Bedford (15 miles)
Other fire doors in Bletchley
- School & Healthcare Fire Doors in Bletchley
- Flat Entrance Fire Doors in Bletchley
- Fire Door Replacement in Bletchley
- Communal & Corridor Fire Doors in Bletchley
- Commercial & Office Fire Doors in Bletchley
- Fire Door Supply & Fit in Bletchley
- Fire Exit Doors in Bletchley
- FD60 Fire Doorsets in Bletchley
- FD90 & FD120 Doorsets across Buckinghamshire
- All fire doors in Bletchley