Getting FD60 fire doors fitted in Colne
Looking for FD60 fire doors in Colne? Our supply and fit service covers BB8 and the surrounding area, including Nelson and Burnley. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Where possible we combine Colne surveys with other visits in Lancashire, such as Nelson and Burnley, which helps keep survey dates flexible.
Regulations for FD60 fire doors in Lancashire
In Colne, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Colne
Our guide price for FD60 fire doors in Colne is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Colne
Higher-risk stores and compartment walls are among the most common settings for FD60 fire doors, in Colne as elsewhere.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Colne property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD60 fire doors in Colne
Can you fit just one door in Colne?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Lancashire.
How quickly can you survey in Colne?
We arrange surveys around your access needs and, where possible, combine Colne visits with other work in Lancashire. Tell us your preferred dates when you enquire.
What does a Colne quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Colne
- Nelson (2 miles)
- Burnley (5 miles)
- Accrington (11 miles)
- Keighley (11 miles)
- Rawtenstall (12 miles)
- Blackburn (15 miles)
More doorsets for Colne
- Communal & Corridor Fire Doors in Colne
- Acoustic Fire Doors in Colne
- Fire Door Ironmongery & Closers in Colne
- Fire Door Replacement in Colne
- Double & Leaf-and-a-Half Fire Doors in Colne
- Commercial & Office Fire Doors in Colne
- Timber Fire Doorsets in Colne
- Flat Entrance Fire Doors in Colne
- FD60 Fire Doorsets across Lancashire
- All fire doors in Colne